I was recently working on a new skirt design and I had sewed it up in muslin. Once I was done I took a picture and showed to my daughters to get their take on the design and the first question I got was , does it have pockets. I did eventually add pockets to the design and it does make it better and when you want to do something with your hands.
So I decided to draft a universal pattern for others to use. It can be used with almost any pattern just remember that the pattern has a 5/8 inch (1.5cm) seam allowance. If your pattern has a different seam allowance just adjust the pocket pattern’s seam allowance to match.
I drafted the pocket to be big enough to hold a mobile phone.

In this tutorial, we will learn how to sew an in-seam pocket with the free pattern below.

To start download and save the free PDF pattern to your computer. Open your file in Adobe Acrobat Reader. The pattern works for both US letter and A4 paper sizes.
Select actual size. The scale must be 100%. Do not select fit, shrink, or custom scale. After you have printed your pattern check the test square to be sure it printed to correct size.

To assemble your pattern, cut off the right outer boarder of first page as seen in the picture. Align the pages using the triangle notches, tape together and cut out your pattern.



After you cut out your pockets, use the pattern to transfer the notches to your garment. Finish the side seam of both your garment and pocket using a zigzag stitch or serger.
Transfer the circle markings from the pattern template onto your pocket fabric. Stitch the pocket to your garment between the circle marks using a 3/8 inch (1cm) seam allowance. Repeat for each side.



Press the pocket pieces flat, folding them out and away from the garment. Repeat for each side

With right sides together, pin the front and back garments together, making sure the notches and pocket pieces align perfectly.

Stitch the front and back together along the side seam and around the pocket using a 5/8 inch (1.5 cm) seam allowance.


Finish the outer edge of your pocket using a zigzag stitch or serger.

Clip into the back seam allowance right at the top and bottom of the pocket—just up to your stitching—so the seam can lay flat. Press your side seams open.

Turn your garment right side out and give the pocket one last press, making sure it lays neatly toward the front.



Until next time, happy sewing…
